<br><A href="index.htm"><b>Home</b></A>
WHAT'S NEW
C400 Digital Moisture Meter
An affordable digital resistance type moisture meter suitable for timber handlers, inspectors, tradesmen and home owners. This instrument is simple to use and is also capable of correcting readings for temperature and common NZ building timbers.

Model C400-SR has selectable corrections for most common NZ and Australian timbers and can record up to 170 readings in non-volatile EEPROM memory. Stored data is downloaded via an RS232 serial port in either MContent® kiln management format or comma separated variable (CSV) format for importing into spreadsheets.


C400 Digital Timber Moisture Meter
Features Calibrated to AS/NZS 1080.1:1997 Standard
  • Digital display 10% to 100% moisture content
  • Optimum accuracy from 13% to 40% moisture content
  • Supplied with either:
    • 18mm pin electrodes, model C400-P
      or
    • BNC for external sliding hammer electrode, model C400-S(R)
  • Correction for common timber types
  • Selectable temperature correction
  • Weatherproof enclosure

    • Autonics MT4W
    Multifunction Digital Panel Meters

    The MT4W range of multifunction digital panel meters from Autonics have models for AC or DC, current or voltage. These versatile meters can be programmed to suit a wide variety of applications.


    Autonics MT4W
    		Features
  • 4 digit LED display, display range -1999 to 9999
  • Programmable rms or average on AC meters
  • Programmable, pre-scale with offset & multiply functions
  • Wide supply range 100 to 240Vac 50/60Hz

    • Autonics M4YS
    4-20mA Loop Powered Digital Panel Meter

    The M4YS is a loop powered digital panel meter from Autonics. It can be programmed to display a wide range of values corresponding to the 4-20mA signal input.


    Autonics M4YS
    		Features
  • 4 digit LED display, display range -1999 to 9999
  • Programmable offset & pre-scale functions
  • Programmable decimal point
  • Error function, display flashes LLLL/HHHH
  • Supply from 4-20mA current loop

    • SOLEX XENON BEACONS

    The Solex range of xenon beacons are a replacement for the earlier BE and Inergi (IB) beacons. The wide operating voltage, increased efficiency and automatic synchronisation of the Solex make them a universal solution for all types of alarm and monitoring system.


    Solex Xenon Beacons
    		Features
  • Wide supply voltage 10-60Vdc
  • Constant performance over voltage range
  • Current surge suppression
  • Automatic synchronisation
  • High efficiency
  • IP54 shallow base, IP65 deep base
  • Five lens colours, red, amber, green, blue & clear
  • Locking base
    • Roshni Low Profile (RoLP) Sounders

    The Roshni Low Profile (RoLP) Sounder is an enhanced replacement for the earlier Roshni 1992F sounder. It features 32 user selectable tones with 102dB(A) output. The wide operating voltage and range of available tones make it ideal for a range of audible alarm applications.


    Roshni RoLP Sounders
    		Features
  • Supply voltage 9-28Vdc
  • Current 16mA
  • Sound output 102dB(A)
  • Automatic synchronisation
  • Volume control, 20dB
  • IP65
  • Second tone for two tone alarms

    • CT-IL Current Transformer to 4-20mA Loop     		Model CT-IL Current Transformer to 4-20mA Loop

    The CT-IL transducer converts the 5A secondary output from a current transformer into a 4-20mA current loop.

  • Connects directly to 5A CT secondary.
  • Small size easily mounts onto any CT, 45x30x41mm
  • Powered directly from the current loop
    		• NEW Third-Generation
    SMARTlogger™ Time-of_Use Monitors
    		The SMARTlogger series of instruments are designed to monitor on-off status, time of use and total on time. Models are available for lighting systems, motors, relays and switches. Virtually any electric load. The non-contact monitoring makes installation simple.
    All SMARTloggers use SMARTware™ Windows based software that makes it easy to analyse and visually present monitored data.
    SMARTlogger - Features Features
    • INSTANT INFORMATION: 5 digit LCD shows total on time, percent on time
    • SMALLER: 1/3 the size of previous loggers 63x38x19mm (2.5”x1.5”x0.75”)
    • FASTER: USB communications, download 8000 records in less then 7 seconds
    • LONG LIFE: 5+ year battery life, user replaceable battery
    • STORAGE: Capacity for 8000 records
    • RELIABLE: Leading the industry with a 3 year warranty
    • NON_INTRUSIVE MONITORING: No wires to connect or electricians required
    • EASIER: No PC required for field operation
    • NEW MODEL ADDED: CONTACTlogger™ for switches and relays
    Home